Job Information
F.C. DADSON, INC. Machine Operator: Edge Bander in GREENVILLE, Wisconsin
JOB REQUIREMENTS: Essential Functions: Pours glue in the reservoir of the banding machine. Places stack of veneer strips in feed chutes. Adjusts conveyor and trimming saws to width and thickness of panels or tops to be banded. Starts machine and feeds stock into machine that applies glue to edges of stock, pulls veneer strips from feed chute onto edges, dries glue on heated plates, and trims strips flush with edges. Regulates speed of belts that convey stock through machine. Sets temperature control to regulate heat of drying plates. Brushes glue on edges of panels or tops. Adjusts stop on bander machine to width of stock. Sets dial on temperature gauge to heat ram and stop according to thickness of stock. Aligns stock and veneer strips between ram and stop. Depresses pedal to activate ram that presses stock against stop and bonds veneer strips to edges of stock. Places stock on worktable for edge trimming and sanding. Competencies: Knowledge of unit measures and ability to operate hand tools. Verify or determine which product has priority. Reads job ticket for product size, checks product, size, color of laminate and quantity. Knowledge of color matching and wood finishing. Inspect final product for chipped bands, short bands, high bands, and love bands. Examines pieces for cracks, chips, and laminate defects. Requirements: Able to lift and carry 25-50 pounds. Able to complete an 8-10 hour work day. ***** APPLICATION INSTRUCTIONS: Apply In Person: N1043 Craftsmen Drive Greenville, WI 54942 920-757-1486 E-Mail a Rsum: belindaw@fcdadson.com Apply Online: https://fcdadson.bamboohr.com/careers/24?source=aWQ9MjQ%3D