Shire Jobs

Summary About the Position: You will work under the general supervision of the Chief Lock and Dam Section. The employee works independently with considerable freedom from technical control in selecting and establishing methods to carry out assignments to completion. This is a Direct Hire Authority (DHA) solicitation utilizing the DHA for Certain Personnel of DoD Workforce to recruit and appoint qualified candidates to positions in the competitive service. Responsibilities Serve as staff engineer regarding technical matters of an engineering/construction/maintenance nature Recommend, coordinate, and assist supervisors/managers in the operation, inspection, and maintenance of the District lock and dam projects. Assist the chief in directing and coordinating activities related thereto by conducting inspections of all lock and dam projects to assure maintenance is done according to policies and instructions. Determine condition and utilization of electrical, mechanical, and hydraulic equipment and complete systems such as lock gates, valves, dam gates, service bridge structures, etc during inspections. Coordinate with Maintenance Section regarding all repair party work accomplished at lock and dam projects. Observe conditions and obtains data for planning future operation and furnishes guidance and assistance to field supervisors about difficult, unusual, unprecedented, or special projects. Resolve emergency situations and keeps supervisor informed of key issues and decisions made to solve or avoid significant problems. Develop specifications for one-of-a-kind items to complete unique maintenance work in an efficient, lowest cost manner. Requirements Conditions of Employment Qualifications Who May Apply: US Citizens In order to qualify, you must meet the education and/or experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. Specialized Experience GS 7: One year of specialized experience which includes learning the performing engineering of assisting in the operation, inspection, and maintaining of lock and dams or similar facilities and working under the supervision of superiors. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-05), OR Education: One full year of graduate level education in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering OR Superior Academic Achievement: Successful completion of all the requirements for a bachelor's degree with Superior Academic Achievement. In order to be creditable under this provision, Superior Academic Achievement must have been gained in a curriculum that is qualifying for the position to be filled, such as that identified in Education above Superior Academic Achievement is based on: Class Standing - Applicants must be in the upper third of the graduating class in the college, university, or major subdivision, such as the College of Liberal Arts or the School of Business Administration, based on completed courses;OR Grade-Point Average (G.P.A.) - Applicants must have a grade-point average of either (a) 3.0 or higher out of a possible 4.0 ("B" or better) as recorded on your official transcript, or as computed based on 4 years of education, or as computed based on courses completed during the final 2 years of the curriculum; or (b) 3.5 or higher out of a possible 4.0 ("B+" or better) based on the average of the required courses completed in the major field or the required courses in the major field completed during the final 2 years of the curriculum.; (3) Honor Society Membership - Applicants may be considered eligible based on membership in one of the approved national scholastic honor societies listed by the Association of College Honor Societies (https://www.achsnatl.org/). OR Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) by 18. Add the two percentages. Specialized Experience GS 9: One year of specialized experience which includes learning and assisting with the review of engineering plans and/or specifications for accuracy; assisting with preparing performing professional engineering duties at lock and dams or similar facilities, recommend, coordinate, and assist supervisors/managers in all engineering duties. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-07), Or Education: Master's or equivalent graduate degree or 2 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates that knowledge , skills, and abilities necessary to do the work of the position, such as : Engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering OR Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the first year (total graduate semester hours minus 18) by 18. Add the two percentages. Specialized Experience GS11: One year of specialized experience which includes assisting with the review of engineering design plans and/or specifications for accuracy, preparing features for lock and dam or similar facilities, under supervision. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-09). OR Education: Ph.D. or equivalent doctoral degree or 3 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering. OR Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the second year (total graduate semester hours minus 36) by 18. Add the two percentages. Specialized Experience GS 12: One year of specialized experience which includes independently performing professional engineering duties, recommend, coordinate, and assist supervisors/managers in all engineering duties. Operate, inspect, and maintain lock and dams or similar facilities. Oversee obligation and expenditure of funds. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-11). You will be evaluated on the basis of your level of competency in the following areas: Education Basic Requirement for Architect: A. Degree: Bachelor's degree (or higher degree) in architecture or in a related field that included 60 semester hours of course work in architecture or related disciplines of which at least (1) 30 semester hours were in architectural design, and (2) 6 semester hours were in each of the following: structural technology, properties of materials and methods of construction, and environmental control systems. OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the arts and sciences underlying professional architecture, and (2) a good understanding, both theoretical and practical, of the architectural principles, methods, and techniques and their applications to the design and construction or improvement of buildings. The adequacy of such background must be demonstrated by at least one of the following: (1) Related Curriculum - Degree in architectural engineering provided the completed course work in architectural engineering provided knowledge, skills, and abilities substantially equivalent to those provided in the courses specified in statement A above, or (2) Experience: 1 year of experience in an architect's office or in architectural work for each year short of graduation from a program of study in architecture. In the absence of any college courses, 5 years of such experience is required. This experience must have demonstrated that you have acquired a thorough knowledge of the fundamental principles and theories of professional architecture Basic Requirement for Engineer: Civil Engineer (0810), Mechanical Engineer (0830), Electrical Engineer (0850): A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions In addition to meeting one of the basic requirements above, to qualify for this position you must also meet the qualification requirements listed in the Qualifications section. FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/ Additional Information Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration. You will be required to provide proof of U.S. Citizenship. One year trial/probationary period may be required. Employment hiring incentives may apply based on current agency policy. Direct Deposit of Pay is required.. Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees. If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet. This is a(n) CF 18 - Engineer and Scientist Career Field position. Multiple positions may be filled from this announcement. Salary includes applicable locality pay or Local Market Supplement. Permanent Change of Station (PCS) allowances may be authorized, subject to the provisions of the Joint Travel Regulations and an agency determination that a PCS move is in the Government Interest. If you are a current federal employee duty located 50 miles or more outside of the area for this recruitment, you "may" be considered for a relocation incentive. This incentive option is not applicable to new to federal government employees. If you are new to federal service and meet the criteria, you "may" be considered for a recruitment incentive. This incentive option is not applicable to current federal employees.